ACRONIS Work Light 9.1 Manual do Utilizador

User's GuideAcronis True Image 9.1Enterprise ServerCompute with confidencewww.acronis.com

• Bootable backup media – When backing up to removable media, users can make this media bootable in the same manner as rescue CD, so separate recove

Chapter 14. Adding a new hard disk If you don't have enough space for your data, you can either replace the old disk with a new higher-capacity

If the cursor turns to two vertical lines with left and right arrows, it is pointed at the partition border and you can drag it to enlarge or reduce

Chapter 15. Command-line mode and scripting Acronis True Image Enterprise Server (local version) supports the command-line mode, as well as the GUI

Specifies the partitions to include into the image file by numbers. The list of available partitions is provided by /list. Partition numbers are spec

/password:[password] Specifies the password for the image file (if required). /harddisk:[disk number] Specifies the hard disks to restore by numbers.

/target_harddisk:[disk number] Specifies the target hard disk number where the source hard disk will be cloned. 5. explore Connects an image file as

Specifies partitions from which free space will be taken for Acronis Secure Zone creation. /size:[ASZ size in sectors] Sets the Acronis Secure Zone s

/net_password:[password] Specifies a user password when verifying an image from a network drive. 11. help Shows help for commands. 15.1.2 trueimage

3. List trueimagecmd /list • This will list available partitions. 4. Clone trueimagecmd /clone /harddisk:2 /target_harddisk:3 • Clone hard disk 2 t

15.2.2 Script structure Scripts are written in the XML language and you can use the following tags: Source. Specifies the partitions or disks to be

• SuSE 8.0, 8.1, 8.2, 9.0, 9.1, 9.2, 9.3, RedHat 7.3, 8.0, 9.0, Advanced Server 2.1, Advanced Server 3.0, Advanced Server 4.0, Fedora Core 1, Fedora

</backup> The script for backing up to tape (tapeN specifies the tapes numbers): <? xml version="1.0" encoding="utf-8" ?

products that you can’t solve yourself by using this guide, then please contact Acronis Technical Support. More information about contacting Acronis

Chapter 2. Acronis True Image Enterprise Server installation and starting 2.1 Installing Acronis True Image Enterprise Server components To instal

(disabled by default) provides the ability to include Acronis True Image Enterprise Server into Bart PE plug-in tab. The plug-in files will be placed

2.3.2 Firewall setup Acronis True Image Enterprise Server uses the following ports and IP addresses for remote operation: • server (Acronis True Im

Chapter 3. General information and proprietary Acronis technologies 3.1 The difference between file archives and disk/partition images A backup arc

this case, you need not to re-create the initial full image, so the backup time is not crucial, and the restore time will be minimal. Alternatively,

3.4 Acronis Startup Recovery Manager 3.4.1 How it works The Acronis Startup Recovery Manager enables starting Acronis True Image Enterprise Server

3.5.1 Backup locations, their quotas and time limits Backup server is a networked computer where Acronis Backup Server is installed. A backup locati

Copyright © Acronis, Inc., 2000-2006. All rights reserved. “Acronis”, "Acronis Compute with Confidence", “Acronis Snap Restore”, “Acronis R

Administrator profiles are used for managing backups, created by backup tasks, remotely controlled from Acronis True Image Management Console. An adm

Finally, the image will be fully restored even if the user performs no actions at all. But if you choose to start working as soon as possible after t

Acronis Universal Restore does not conflict with Microsoft System Preparation Tool (sysprep). If you got accustomed to using Sysprep, you can use bo

3.7.2 Using Acronis Universal Restore in virtual environment Virtual machine technologies provide a powerful tool to help accelerate the development

3.8 Using dynamic disks and volumes Acronis True Image Enterprise Server supports Windows LDM (also called Dynamic Disks). However, as dynamic disks

3.10 Viewing disk and partition information You can change the way of data representation in all schemes you see in various wizards. To the right ar

Chapter 4. Using Acronis True Image Management Console 4.1 General information Acronis True Image Management Console is the primary tool for managi

4. Specify network name or IP address of the machine on which Acronis component is to be installed. You can also select the machine from the list of

Main window of Acronis True Image Management Console when connected to a remote computer The task list content depends on the programs installed on

Click Show tasks -> Manage, then follow the Wizard’s instructions. See details in Chapter 8. Scheduling tasks. • Set up backup/restore options,

END-USER LICENSE AGREEMENT BY ACCEPTING, YOU (ORIGINAL PURCHASER) INDICATE YOUR ACCEPTANCE OF THESE TERMS. IF YOU DO NOT WISH TO ACCEPT THE PRODUCT U

Here you can monitor states of Acronis True Image Enterprise Server tasks (backup, restore, validating backup archives) on all networked computers:

3. Create a disk/partition backup task for several remote computers at once (see 4.4 2 Crea ing new g oup backup tasks). .t r 4. Connect to a remote

You should also provide the archive name for each computer, unless the archives are targeted to Acronis Secure Zones or a backup server. Pressing the

4.4.3 Group tasks management The Group Tasks Management window displays the list of group tasks. To see details of a group task, click the button to

4.5.1 Default settings Each user or computer, added to Acronis Backup Server database, is associated with the default backup location and the defaul

To enable Acronis Backup Server to process archives, schedule quotas/time limits check task. Select Specify Default Settings -> Schedule Automati

You can use the default backup location, quotas and time limits or make particular settings for the new computer. If you specify a new path to backu

To do so, first, add this person to AcronisBackupServerUsers group. Then click Set up User profiles -> Add, select the user name and specify backu

Deleting a user profile will disable backup to backup server for this user and his existing archives will be deleted. This operation might also be ti

The default backup location cannot be deleted. If you try to do so, the program will clean the default backup location and issue an appropriate mess

Table of Contents CHAPTER 1. INTRODUCTION ...

Acronis True Image Management Console does not contain Rescue Media Builder in its own installation. Therefore, to be able to create bootable media/

Chapter 5. Using Acronis True Image Enterprise Server (local version) Acronis True Image Enterprise Server supports the command-line mode for data b

• Show Log – opens the Log Viewer window • Manage Acronis Secure Zone – used to create, delete and resize a special hidden partition for storing ar

5.2 Managing a local computer You can perform the following operations on the local computer. • Backup and restore data, including system disks/par

• Turn on/off Windows System Restore tool See 11.5 Managing Sys em Restore. t• Create bootable rescue media, its ISO or RIS package See Chapter 1

Chapter 6. Creating backup archives To be able to restore the lost data or roll back your system to a predetermined state, you should first create a

6. Set filters for not to back up files of specific types. For example, you may want hidden and system files and folders, as well as files with .~, .

The “farther” you store the archive from the original folders, the safer it will be in case of data damage. For example, saving the archive to anot

11. Click Next. 12. Select the backup options (that is, backup file splitting, compression level, password protection, pre/post backup commands etc.

In Acronis True Image Enterprise Server local version you can adjust the backup process priority. To do so, click on the process icon in the System

4.5 MANAGING BACKUP SERVER ... 33

5. Click Next. 6. Select the name and location of the archive file. If you are going to create a full archive, type the file name in the File Name

changes to it, choose full backup. Otherwise it is recommended that you create an ernatively, you can edit the default options from the current scre

6.3.1 Archive protection The default setting – no password. An archive can be protected with a password. To protect the archive from being restored

Unchecking the Do not perform operations until the commands execution is complete box, checked by default, will permit the backup process to run conc

Before/after data capture commands can also be used for purposes, different from suspending the database, especially if VSS support is enabled. You m

If you frequently backup data to network drives, think of limiting the network usage used by Acronis True Image Enterprise Server. To set the desire

When backing up to a disket e CD R/RW o DVDt , - r +R/RW: Acronis True Image Enterprise Server will ask you to insert a new disk when the previous

If you want more functionality during restoration, write a standalone version of Acronis True Image Enterprise Server to the rescue disk. Then you wi

Chapter 7. Restoring the backup data 7.1 Restore under Windows or boot from CD? As mentioned above (see 2 4.1 Running Acronis True Image Enterpris

1. Invoke the Restore Data Wizard by clicking on the restore operation icon in the main program window. 2. Click Next. 3. Select the archive. If the

8.1.4 Setting up one-time execution... 75

6. Click Next. 7. Select a folder on your computer where you want to restore selected folders/files (a target folder). You can restore data to their

12. Click Next. 13. Set filters for not to restore files of specific types. For example, you may want hidden and system files and folders, as well as

7.3 Restoring disks/partitions or files from images To restore a partition (disk) from an image, Acronis True Image Enterprise Server must obtain ex

To restore data from an incremental backup, you must have all previous incremental backup files and the initial full backup. If any of successive ba

However, you can choose an ordinary way of restoration for that image. This will allow you to make changes to the restored partition, that would be i

If you are restoring a system partition to the new (or the same) disk and want to load an operating system from it, you will select Active. If you re

These changes might be useful if you are to copy your hard disk to a new high-capacity one by creating its image and restoring it to a new disk wit

7.3.12 Using Acronis Universal Restore Acronis Universal Restore is an optional Acronis True Image Enterprise Server feature. It should be purchased

4. Click Next. 5. If you know which drivers will fit for the new hardware, add them to the drivers list in the next window. You can add HAL and hard

If Acronis Universal Restore finds no HAL or hard disk controller drivers compatible with the new hardware in all available sources, you will be prom

Chapter 1. Introduction 1.1 Acronis True Image Enterprise Server – a complete solution for corporate users You have come to rely on your servers to

Overwrite existing file if it is older – this will give the priority to the most recent file modification, whether it is in the archive or on the dis

Verification of the file system is available only when restoring disk/partitions under Windows and for FAT16/32 and NTFS file systems. Copyright © A

Chapter 8. Scheduling tasks Acronis True Image Enterprise Server allows you to schedule periodic backup tasks. Doing so will give you peace of mind,

• When my computer shuts down – the task will be executed before every server shutdown or reboot • When I log off – the task will be executed each

If the computer is off when the scheduled time comes, the task won’t be performed, but you can force the missed task to launch at the next system st

8.1.3 Setting up monthly execution If you select the monthly execution, set the Start time and days on which to execute the task: • Day – on the sp

If the computer is off when the scheduled time comes, the task won’t be performed, but you can force the missed task to launch at the next system

Chapter 9. Managing Acronis Secure Zone 9.1 Creating Acronis Secure Zone Acronis Secure Zone can be located on any local disk. It is created using

9.2 Resizing Acronis Secure Zone 1. When prompted by the wizard, select Manage Acronis Secure Zone. 2. Select to increase or decrease the zone. You

Zone deletion might take several minutes or more. Please wait until the whole procedure is finished. Acronis Secure Zone deletion will automatically

Supports Cutting Edge Technology Businesses today are moving to leverage the latest technologies, dual-core 64 bit processors and 64 bit operating s

Chapter 10. Creating bootable media You can run Acronis True Image Enterprise Server on a bare metal or on a crashed computer that cannot boot. You

Acronis True Image Enterprise Server offers the following components: • Acronis True Image Enterprise Server full version Includes support of USB,

4. If you are creating a CD, DVD, diskettes or any removable media, insert the blank disk so the program can determine its capacity. If you chose to

Chapter 11. Other operations 11.1 Validating backup archives To be certain that your archives are not damaged, you can check their integrity. 1. To

11.2.1 Email notification To set up the e-mail notification, select Tools -> Options -> Notifications -> E-mail: Provide the email address

Provide the name of the computer to which notifications will be sent. Below in this window you can choose whether you want to get notifications: - wh

You can also change column width by dragging the borders with a mouse. 11.4 Event tracing 11.4.1 Windows event log You can choose whether to store

1. To invoke the System Restore Management Wizard, select Manage System Restore from the menu or from the Tools group, or click Manage System Restore

Chapter 12. Mounting an image as a virtual drive Acronis True Image Enterprise Server can mount partition images as virtual drives, thus letting you

If you added a comment to the archive, it will be displayed to the right of the drives tree. If the archive was protected with a password, Acronis T

6. Acronis Bootable Rescue Media Builder - creates bootable media, its ISO image or RIS packages enabling data recovery in case of non-Windows or cor

8. Click Next. 9. Select whether you want to mount image in Read-only or Read/Write mode. 10. Click Next. 11. If you select Read/Write mode, the pr

Chapter 13. Transferring the system to a new disk 13.1 General information Sooner or later any server user finds out that his hard disk is too smal

13.2 Security Please note the following: if the power goes out or you accidentally press RESET during the transfer, the procedure will be incomplete

You can determine the source and destination using the information provided in this window (disk number, capacity, label, partition and file system

13.3.4 Partitioned destination disk At this point, the program checks to see if the destination disk is free. If not, you will be prompted by the No

• Keep data – leave the old disk partitions and data intact • Destroy data – destroy all data on the old disk. If you are going to sell or give aw

The second method takes more time, but makes it impossible to recover data afterwards, even with special equipment. The first method is less secure,

unallocated. Further, you will be able to use the unallocated space to create new partitions or to enlarge the existing partitions with special tools

If you have selected manual partition creation before, the partition layout will look different. This partitioning method is described below. 13.3.1

To resize either partition, check the Proceed relayout box. If you are satisfied with the partition layout shown, uncheck this box (if checked). Cli